Marine Vibration Isolation Pads in Malabo - Mechanical Systems

Marine Vibration Isolation Pads are specialized damping devices designed to reduce vibrations and noise in marine mechanical systems. They are typically made from durable, resilient materials like rubber or elastomers to withstand harsh marine environments. These pads enhance equipment longevity and improve onboard comfort by isolating vibrations from engines, generators, and other machinery.

Size: Typically ranges from 50mm x 50mm to 300mm x 300mm, with thicknesses between 10mm and 50mm.

Grade: Available in various hardness grades, commonly Shore A 30 to 80.

Viscosity: Not applicable, as these are solid elastomeric materials.

Buoyancy: Designed to be neutrally buoyant or slightly positive, depending on material density (0.9–1.2 g/cm³).

Material: Commonly made from nitrile rubber (NBR), neoprene, silicone, or polyurethane for durability and resistance to seawater, oils, and UV exposure.

Load Capacity: Supports static loads from 0.1 MPa to 5 MPa, depending on design and material.

Temperature Range: Operates between -40°C to +80°C, with some high-grade materials extending to +120°C.

Damping Efficiency: Reduces vibration transmission by 70–90% across frequencies of 10–1000 Hz.

Compression Set: Typically less than 10% after prolonged use under load.

Fire Resistance: Often meets SOLAS or MIL-SPEC fire-retardant standards.